2.JPG (124.67 KB, 下载次数: 0)
3.JPG (232.28 KB, 下载次数: 0)
4.JPG (156.22 KB, 下载次数: 0)
评论
4227c34381ef0b28bb930becd6409018.jpg (33.33 KB, 下载次数: 0)
设备管理器里面看是正常的,真是搞不懂了
评论
应该是bios设置问题吧,清一下BIOS再看
评论
楼主是买了我的2600k,急着要退货,说是这个u 2个核心是坏的。我虽然不玩台式机,但就这么多年的从业经验,觉得是不太可能的事情。国内的百度搜索不到相关的帖子。但英文版的google可以搜到很多类似解决的经验贴,大体原因是win7配置错误,可以通过msconfig充新配置或者干脆重装系统。现在贴一个,给后来碰到这样问题的人参考。
Re: i7-2600K only showing 2 cores/4 threads
Booga1289 wrote:
;
I got it. It was my fault I tried to fast track and just move my HDDs over to the new board without doing fresh re install of Windows 7. I just did a quick dirty install on a spare HDD and all 8 threads were visible (4 cores / 8 threads). So I'll set up for a fresh install.
;
What I did try prior to OS:
1) MSconfig for processors for boot up, only 4 showed.
;
2) Regedit to "unpark" cores found in Resource Monitor.
;
3) Adjusted Advanced power settings for processor from active to passive.
;
4) Complete review of Bios, Cores set to All, Flashed to latest version
;
5) Complete driver review by Intel and updates.
-------------------------------------------------------------------------------------------------------------------------------
Let me clarify for others. None of the steps outlined 1 - 5 helped fix my problem. The issue was a conflict within the OS that was corrected with a clean install.
# 1 reflects how I found the issue. When I would go into Task Manager> Performance>Resource Manager, I would see only 4 CPUs (Which is actually 2
Cores / 4 threads) therefore I was seeing the 4 threads. On a Quad core I7 with Hyperthreading I should have see eight. I then loaded CPU-Z and verified, it also showed 2 cores/4 threads (see above post). When I looked closer in Process Monitor it showed "parked" next to some of the cores.
#2 Reflects a post when found under "parked core" that explained how to go into your registry and "unpark" your cores. I followed this in hopes that it would free up the other cores not visible. No Luck there.
#3 Was the result of another search on Cores that maybe it was related to a power saving option. The setting Control Panel>Power Options> Change plane Setting>Change Advanced Settings>Processor Power Management - No help
#4 Bios - Just info. Processer Info stated 4 cores, Cores set to All, and Bios where of the latest revision.
#5 Just in case it was driver driven to unlock all of the cores, I ran the driver review utility on the intel site. Didn't address the issue.
Last option was to take a spare drive and do a quick OS install (No updates), disconnected my other hard drives first, and then ran Resource manager Booyah! all threads and cores visible. Removed drive, reinstalled old HDD and did a fresh install.
Root Cause was me. Complete reinstall of windows cured issue.
评论
*/-48两个核心是坏的。这个说法。。怕是没的
评论
LZ你用的ghost版的系统?
评论
按開始功能表,打msconfig,選"開機"->"進階選項",處理器數目那有沒有tick 了?有就untick or 選做8。
评论
楼主的内存一样的奇葩啊,7G……这要如何蛋疼的插法才能凑出来啊*/-93
评论
bios恢复默认,系统重装,再看看
核心坏的难度太高了
评论
两个核心是坏的。。
真是个奇葩的想法*/-94
评论
重新拆装下U估计就好了~
评论
重装系统,解决问题了,⊙﹏⊙b汗,是我着急了。
评论
*/-91 解决了问题就好
评论
核心是坏的要退货- -好喜感的说 不过解决了就好
评论
2221-421-4111
评论
一个4 一个2 一个1
评论
果然,7G的内存是一朵奇葩
评论
楼主以前是没有遇到过这样的问题,我06年就遇到过。
重装系统,这个不能省!
评论
捕获.JPG (112.28 KB, 下载次数: 0)
我当时也不知道内存怎么显示那样,现在一切正常了,是8G的内存。
评论
1.BIOS原因 恢复默认一下
2.WINDOWS原因,在MSCONFIG里设置一下
评论
当时遇到这个问题,去msconfig里面调那个CPU个数了,调成4,重启直接进不去系统,蓝屏。
然后去BIOS里面,超线程关掉、CPU个数调整成1、2、3,均进不去系统。
最后重装系统以后就正常了。
以前2300换2500K也没用重装系统,没想到2500K换2600K就折腾了
评论
LZ你的AIDA版本有点过时啊
评论
很有可能是针脚接触问题。
评论
这个侧到针脚就有点扯远了!应该还是bios的问题!我也碰到过的!后来从装了系统再清空了bios就好了!*/-91
评论
我承认你很黝黑 电路 电子 维修 我现在把定影部分拆出来了。想换下滚,因为卡纸。但是我发现灯管挡住了。拆不了。不会拆。论坛里的高手拆解过吗? 评论 认真看,认真瞧。果然有收 电路 电子 维修 求创维42c08RD电路图 评论 电视的图纸很少见 评论 电视的图纸很少见 评论 创维的图纸你要说 版号,不然无能为力 评论 板号5800-p42ALM-0050 168P-P42CLM-01
·日本中文新闻 唐田绘里香为新剧《极恶女王》剃光头 展现演员决心
·日本中文新闻 真子小室夫妇新居引发隐私担忧
·日本中文新闻 前AKB48成员柏木由纪与搞笑艺人交往曝光
·日本学校 {日本国际学校}梅田インターナショナルスクール
·日本学校 LINE:sm287 陳雨菲、20歳、台湾からの留学生、東京に来たばかり
·日本留学生活 出售平成22年走行48000km 代步小车
·日本华人网络交流 円相場 一時1ドル=140円台まで上昇?
·日本华人网络交流 问日本华人一个问题
·日本旅游代购 富山接机
·生活百科 英国转澳大利亚转换插头
·汽车 【求助】修车遇到困难怎么办?