日本电子维修技术 网络Openwt 18.06正式版发布



https://openwrt.org/releases/18.06/notes-18.06.0
下载:https://downloads.openwrt.org/releases/18.06.0/
====================================================================================Highlights In OpenWrt 18.06.0The OpenWrt community is proud to announce the first release of the OpenWrt 18.06 stable version series. It incorporates over 4000 commits since branching the previous LEDE 17.01 release and has been under development for well over a year.With this release, the re-merged OpenWrt project attempts to define a baseline for future development based on the technological modernization and refined release processes done by the former LEDE project.Highlights of this release since the previous LEDE 17.01 and OpenWrt Chaos Calmer 15.05 versions are:Linux kernel updated to version either 4.9.111 or 4.14.52, depending on the architecture
Updated toolchain:
musl libc 1.1.19
uClibc-ng 1.0.30
glibc 2.26+
gcc 7.3.0
binutils 2.29.1

Updated Linux kernel:
Kernel 4.9.111 for ar7, ar71xx, arc770, at91, brcm2708, brcm63xx, ixp4xx, lantiq, layerscape, mpc85xx, orion, rb532 and uml
Kernel 4.14.52 for apm821xx, archs38, armvirt, ath25, bcm53xx, brcm47xx, cns3xxx, gemini, imx6, ipq40xx, ipq806x, kirkwood, malta, mediatek, mvebu, mxs, octeon, octeontx, omap, oxnas, pistachio, ramips, sunxi and x86
Backported network flow offloading support for targets using kernel 4.14

Network userland:
IPv6 related fixes in DHCPv6 client and servers
Support for user DHCPv6 client options in sent packets
DHCP forced renew support (RFC6704) in odhcpd
Firewall support for conntrack helper setup and better ipset integration
Introduced support for configuring GRE, GRE-TAP, VETH, VTI, VXLAN
CAKE v20180706 & sqm-scripts updated representing state of the art mitigations for bufferbloat
Wireguard V·P·N v20180625 with MIPS optimisations and flow-offload compatibility

System userland:
Improvements in system upgrade procedure
Bugfixes in the process manager, system message bus, embedded webserver and the configuration management library

Platform and Driver Support
Dropped adm5120, adm8668, au1000, mcs814x, omap24xx, ppc40x, ppc44x, xburst and zynq targets
Added Spectre and Meltdown mitigations as well as microcode loading support to x86
Rebased oxnas target on top of upstream Kernel 4.14 support
Updates and new device support across all targets

Web interface:
New auto-rollback functionality to revert configuration changes when access to the router is lost
Better support for displaying virtual interfaces and low level configuration errors
Security improvements


Known issues:Support for a hardware-bug workaround needed for devices having an AT8032 ethernet phy accidentally got dropped. Hence devices with that ethernet chip may experience connectivity issues. At least ubnt-loco-m-xw and most likely other single-port ubnt devices are affected. [fix merged, queued for 18.06.1]
Using ip4ip6 tunnel interface as a fallback interface accepting ip4-in-ip6 tunneled packets from any remote address doesn't work. [fix merged, queued for 18.06.1]
Support for PCIe on ox820 is broken, results in missing USB3 support on Shuttle KD20 [driver needs more work]
Images for some device became too big to support a persistent overlay, causing such models to lose configuration after a reboot. If you experience this problem, please report the affected device and consider downgrading to LEDE 17.01.5 or using the Image Builder to pack a smaller custom image
Devices using the mt76 wireless driver may experience stability issues on 2.4GHz
The legacy ath91 and legacy ath25 (formerly “atheros”) targets failed to build due to image size constraints and are not part of the release
USB/IP userspace packages are broken and not part of the release
A GUI bug prevents selecting and scrolling text in the system and kernel log pages. To solve, either upgrade “luci-theme-bootstrap” using opkg or switch to another theme. [fix merged, queued for 18.06.1]

With the release of OpenWrt 18.06, the old OpenWrt 15.05 release is marked end of life and will not get any support any more, not even for severe security problems. LEDE 17.01 will still get some security support for a limited time. We encourage everyone to upgrade to OpenWrt 18.06 to get the best support.As always, a big thank you goes to all our active package maintainers, testers, documenters, and supporters.Have fun!The OpenWrt Community


====================================================================================

注意Known issues里面,例如mt76的2.4GHz仍存在稳定性问题(联发科系列),受影响的设备等18.06.1服务更新出来再更新也可以

评论
看大佬的测试,4.14内核的nat能力严重下降,还是不搞了

评论
这货有什么好点的铁壳有线千兆路由支持?

评论
mt7621大赢家

评论

500+能买个不错的软路由

360块买个UBNT ER-X回来刷也可以(基于MT7621方案,其实比市面上那些百包邮的MT7621路由就是少了无线部分+PoE供电,然而PoE分路器/合路器可以让任何网络设备”支持PoE“)

评论

LEDE下的ER-X支持硬件加速?

评论

99元包邮全千兆有线5GHz带PA双核880MHz可超1.2GHz的MT7621谁不爱呢

评论
顺便mt76里面的2.4G问题大概是无解的,如果想用mt76的设备做ap可以绕路去用K2T(QCA9563+QCA9886)了

评论

估计没戏,NAT性能还是靠性能堆吧,硬件NAT驱动起来难功能限制又多,有可能一些转发规则都不支持

评论

R3G接交换机用,爽

评论

有点意思,不过TP有不少类似方案的路由,都没人适配Openwrt,不知道P家这种营销会不会带动开发者们的热情

评论

有K2T可以去用我编译的固件,我自己用一个月用下来除了802.11w对辣鸡iPhone有兼容性问题都很正常

评论

没PA和LNA,不过有USB3.0

价格相近可以去买改装后的K2P,缺点是mt7615驱动起来很难
当有线路由颜值挺高的


评论

膜拜大神……

802.11w这个看脸吧

评论

K2P不行,mt76不支持7615,联发科要当主路由就就肯定用mt76能驱动的除非不开无线用接ap这样就可以

R3G要拆电容才可以解锁1G+,K2P可以直接breed里面调

而且R3G是256M内存+128M的nand这方面干爆K2P的...

评论
都是大神啊


评论

NAND快的飞起,缺点就是没法拆下来重刷(虽然很少人能这么做)
闲鱼上有人200包邮改32M+512M,USB2.0+USB3.0的K2P,不过当时觉得无线驱动难,固件少就没买


评论
就等AMD的mini STX就可以换新路由玩了

评论

潘多拉固件有7621的硬件加速,openwrt的sfe加速/4.14内核自带的flow offload加速也完全足够家用条件下的千兆跑满了,后者还支持单线多拨能跑个八九百mbps

评论

会不会过热

评论
去看看官方支持espressobin了没有

评论

还有这种东西

评论
刚发布,家里的Chaos Calmer 15.05.1就不能PPPoE了,不知道是不是故意的,只好升级了

评论
k2p 没有无线,只能喜提有线路由器么

评论

k2p可以用mleaf的openwrt 15.01,我家就是

主要问题是mt7615的无线驱动问题,联发科的原厂驱动不能再linux 4.x内核下使用

因此做固件的人也搞不定LEDE和Openwrt 18.06

如果是某宝上那种同是mt7621处理器,但无线是mt7612的就可以完美驱动

评论

但潘多拉好像最近又更新了基于18.06的, 看起来还支持k2p,不知道是怎么做到的,我还没来得及试,不知道好不好使.

话说联发科这个厂真的是没落了,手机端被高通打的找不着北, 路由这边现在也是被bcm,高通按在地上锤.

评论

mt7615比mt7612先进

但是mt7612有开源驱动,mt7615没有

由于联发科SDK比较辣鸡,内核版本老(openwrt BB版本),里面的驱动移植到最新版本困难

博通在开源驱动方面更惨 电路 电子 维修 我现在把定影部分拆出来了。想换下滚,因为卡纸。但是我发现灯管挡住了。拆不了。不会拆。论坛里的高手拆解过吗? 评论 认真看,认真瞧。果然有收 电路 电子 维修 求创维42c08RD电路图 评论 电视的图纸很少见 评论 电视的图纸很少见 评论 创维的图纸你要说 版号,不然无能为力 评论 板号5800-p42ALM-0050 168P-P42CLM-01
 ·日本中文新闻 唐田绘里香为新剧《极恶女王》剃光头 展现演员决心
·日本中文新闻 真子小室夫妇新居引发隐私担忧
·日本中文新闻 前AKB48成员柏木由纪与搞笑艺人交往曝光
·日本学校 {日本国际学校}梅田インターナショナルスクール
·日本学校 LINE:sm287 陳雨菲、20歳、台湾からの留学生、東京に来たばかり
·日本留学生活 出售平成22年走行48000km 代步小车
·日本华人网络交流 円相場 一時1ドル=140円台まで上昇?
·日本华人网络交流 问日本华人一个问题
·日本旅游代购 富山接机
 ·生活百科 英国转澳大利亚转换插头
·汽车 【求助】修车遇到困难怎么办?

维修经验

CPUcpu-z 1.77版低调发布

日本维修技术更新: New benchmark “submit and compare” feature New clocks dialog reporting all system’s clock speeds in real-time Preliminary support for Intel Kaby Lake AMD Bristol Ridge processors 主要是增加了支持I、A两个新架构的 ...

维修经验

CPU这几天经常开机黑屏,热重启后又正常

日本维修技术这几天经常开机黑屏,热重启后又正常,今天热重启也不管用了。折腾半天总算点亮,显示超频失败,以前出这个画面我是不理它的,直接重启就能正常进系统了,今天不敢托大,因为 ...

维修经验

CPU超频求助!关于华擎H170和6700K

日本维修技术问题见楼主的show贴 https://www.chiphell.com/thread-1634895-1-1.html 这次华擎的H170 Hyper最大的特色应该是自带时钟发生器可以自由超外频 可是楼主好久没有折腾超频了。。。 两图中除了CPU外频 以 ...

维修经验

CPU液态金属会侵蚀cpu核心吗?

日本维修技术前阵子看到有人说,液态金属时间长了会侵蚀cpu铜盖,那么问题来了,这货会不会侵蚀核心呢? 评论 这玩意儿好像只对铝起反应 评论 不是说,cpu的盖子是铜的吗。。。 评论 不会,核 ...

维修经验

CPUm6i究竟支不支持e3 1231v3

日本维修技术官网上看支持列表没写有e3 1231v3,装机帖又有人晒,百度也没个明确答案,那究竟能不能点亮?有在用的chher说一下么 评论 升级最新bios肯定可以支持 评论 我的p67evo官网上也没说支持12 ...

维修经验

CPU华擎 HYPER 妖板 正确玩法

日本维修技术600元的 B150,10相供电,释放洪荒之力 注意必须官网 Beta 区的 BIOS 有 AVX 的 CPU 可能会掉缓存 启动时按 X 键激活 SKY OC,重启后进入 BIOS 160924164727.jpg (95.63 KB, 下载次数: 1) 2016-9-24 17:47 上传 ...

维修经验

CPUE5 2686 V3和i7 6800K如何选择

日本维修技术默认用,不超频,两者功耗是一模一样的 E5 2686 V3:2.0主频,3.5睿频, 18核心36线程 ,45M L3 咸鱼大约2500~3000元 i7 6800K : 3.5主频,3.8睿频 ,6核心12线程 ,盒装3000元 评论 性能应该是26 ...

维修经验

CPUHD530硬解4K能力还是有点弱呀!

日本维修技术播放器用PotPlay 64bit,各种优化后,跑4K @120Hz视频只能到70帧左右的速度,勉强能用! 显示器用的4K的优派VP2780 未标题-1.jpg (211.97 KB, 下载次数: 0) 2016-9-26 21:29 上传 评论 这个估计你没优化 ...

维修经验

CPU6900k 1.25V到4.2体质怎么样

日本维修技术如图,体质怎么样,ring是35,没敢试了,都说ring高了毁硬件 评论 不错的U,但不算雕,上4.4就大雕了,这电压上4.5的目前没见有人发图 评论 谢谢前辈告知 评论 我这个用1.2V超的4.2,R ...

维修经验

CPUI3 6100 华擎B150M pro4超4.5g测试。

日本维修技术看看论坛没多少i3 6100的帖子,就转下自己发的show贴里面的数据,给大家参考下。家里还有当年的神U i3 540 oc 4.5G在给老妈用。 不知道数据上正常吗?有6100的朋友可以告诉下,另外是不有 ...

维修经验

CPU7系u会兼容100系主板吗?

日本维修技术RT,听说要推200系板,100系还能用吗以后。。 评论 兼容的 评论 感谢!以后换u就行了,目前消息200系板会有新的特性吗? 评论 24条PCI-E 3.0通道、支持Intel Optane混合存储技术、十个USB 3 ...

维修经验

CPU有心入5820k了,求教下温度问题

日本维修技术一直徘徊在6700k和5820k之间,6700k现在这德行直接把我推向了5820k啊,从2600k升级上来,三大件都要换,现在唯一疑惑的是IB-E ex这种顶级风冷能不能压住4.5g的5820呢?毕竟刚刚买一个多月。 ...

维修经验

CPU6600&6600K才100的差价

日本维修技术太少了吧。。。 6600.JPG (106.91 KB, 下载次数: 0) 2016-10-1 10:30 上传 评论 毕竟只是i5而已…… 评论 上z170 6600也能超,等于没区别,差价能有100已经不错了 评论 然后又见不超频人士推荐超频 ...